Festo ZBH-15 centring sleeve 191409 
Festo Push-in Fitting NPQM-D-G14-Q8-P10, 558665 
Kingdom Street Elbow 1" 90° 
Festo NPQR-DK-G38-Q12 push-in fitting 8085668 
Burkert Type 2000 1/2" BSP St/St Flow Below, 178606 
Festo DSR-12-180-P semi-rotary drive 11909 
Festo ISO cylinder DSBC-50-300-D3-PPSA-N3, 3659505 
HB-1/4-QS-8 non-return valve 153455 
Kingdom Hex Nipple 1/2" BSP 316 SS, HNSS-12 
Category: Adca
Showing 1–25 of 38 resultsSorted by latest
Add to cartADCATrol V16/2, ADCATrol PE986 positioner, PA series pneumatic multi-spring actuator. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
- Add to cart
Adca Pneumatic Control Valve DN40, ADCATrol V16/2, ADCATrol PE986 positioner, PA series pneumatic multi-spring actuator. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
Add to cartValves and Taps – For Steam. The ADCA PRV57 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials
Add to cartValves and Taps – For Steam. The PRV57 can be installed in pressure reducing stations throughout all industries and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.
Add to cartValves and Taps – For Steam. The PRV57 can be installed in pressure reducing stations throughout all industries, and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.
Add to cartThe ADCA PRV57 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases
Add to cartDesigned for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV57 can be installed in pressure reducing stations throughout all industries
Add to cartPilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials.
Add to cartThe PRV57 can be installed in pressure reducing stations throughout all industries, and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.
Add to cartPrecise control of downstream pressures from 0,07 bar to 17 bar. Robust steel or stainless steel construction. Suitable for dead end conditions.
Add to cartUK Distributor, Ex-stock – Adca Pressure Reducing Valves PRV25/2S, Carbon steel with metal to metal sealing. Rising adjustment knob with lock nut. Top cap (adjustment screw with cover).
Add to cartAdca FLT16-10 1/2″ BSP, Ball and Float Steam Trap. SG Iron, Modulating discharge of condensate at steam temperature. Horizontal installation from right to left (R-L)
Add to cartAdca FLT16-10 3/4″, For Saturated and superheated steam. Ball and Float Steam Trap. SG Iron, Modulating discharge of condensate at steam temperature. No backing-up with condensate.
Add to cartADCA 1″ Steam Traps, FLT25-10 1″ BSP Ball and Float Steam Trap. SG Iron, Modulating discharge of condensate at steam temperature.
Add to cartAdca Sensor pockets PK2, used for all TR series self-acting thermostats with rod sensors. Material – Stainless steel 1.4436. The installation site for the sensor pocket is arbitrary when paste is applied. When using oil the sensor pocket must point somewhat downwards.
Add to cartAdca Sensor pockets PK4, used for all TR series self-acting thermostats with rod sensors. Material – Stainless steel 1.4436. The installation site for the sensor pocket is arbitrary when paste is applied. When using oil the sensor pocket must point somewhat downwards.
Add to cartAdca Self Acting Thermostat 0-60°. T series thermostat, range T.205 – 0-60; 30-90 and 60-120ºC. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve.
Add to cartAdca Self Acting Thermostat 30-90°, T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve.
Add to cartAdca Self Acting Thermostat 60-120°, T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve.
Add to cartAdca Thermostats 3 Mts 40-160°. Adca T series Thermostat, range T.405 – 0-120; 40-160 ºC. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve.
Add to cartAdca 1″ Control Valve PN25. Adca TR25 series Control Valve, easily adjustable temperature range and proportional temperature control. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
Add to cartAdca 3/4″ Control Valve PN 25 Cooling. Adca TR25 series Control Valve, easily adjustable temperature range and Proportional temperature control. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications.
Add to cartAdca 1/2″ BSP Control Valve PN25. Adca TR25 series Control Valve, easily adjustable temperature range and Proportional temperature control. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications.
Add to cartAdca 1/2″ Control Valve PN25 Cooling. Adca TR25/R series, easily adjustable temperature range and Proportional temperature control. The liquid filling the thermostat expands when the temperature of the fluid being cooled rises, opening the valve.
Add to cartAdca 3/4″ Control Valve PN25. TR25 series Control Valve, easily adjustable temperature range and Proportional temperature control. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
